Kristina Wright wrote:
So I pulled it apart, checked everything, and reflowed T1. Now I'm
trying to adjust C55 again, but I can't seem to get it to go to the ATU
when I press TUNE. It flashes ATU briefly, then says Hi Cur, then goes
to P 4.3 or so.
Some simple things to check are that you have a proper 50-ohm termination on
the antenna 1 connection of the KAT2. Check that you haven't accidentally
selected antenna 2 while the dummy load is on antenna 1. You can work around
the high current warning by reducing power to about 1 watt or so until you get
the adjustment close to where it needs to be.
--
Cheers!
Kevin.
http://www.ve3syb.ca/ |"What are we going to do today, Borg?"
Owner of Elecraft K2 #2172 |"Same thing we always do, Pinkutus:
| Try to assimilate the world!"
#include <disclaimer/favourite> | -Pinkutus & the Borg
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com