pg 38 - Basic K3 states
"An extra RF I/O connector location is provided (AUX RF, BNC). The sub
receiver’s auxiliary input can
optionally be routed to this connector. K1 then selects either the
main RX path or AUX RF as the sub receiver’s
RF source."
I have this hole in the back panel, with a blanking plug. How one
connects a BNC socket to it, I'm not sure, but I'd like to put that
mod in.
--
As a well spent day brings happy sleep, so life well used brings happy
death. -Leonardo da Vinci, painter, engineer, musician, and scientist
(1452-1519)
On 14 Mar 2008, at 16:06, Dave G. wrote:
David,
David Ferrington, M0XDF Wrote:
all that info is in the owners manual (pg 40 in mine), if you have
the
KAT3, both ant 1 & 2 go through it (although the L-Network is
switch to
Tx ant while is transmitting). If you have the KXV3, you can have an
additional RX only ant on that - it does not go through the KAT3.
I am confused..
Assuming that I don't have the KXV3 how does the sub-receiver work?
What is the meaning of the dashed-line between
the Aux RF connector and the line to SA4/Relay K1 for connection to
the
sub receiver.
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
