>From the symptoms, I suspect that there is a bad connection somewhere. Perhaps some pins are not soldered under the microprocessors IC socket. You may wish to check some archives on this reflector that address this particular problem.
Microprocessor IC's are pretty reliable provided that there was no high voltage stray static electric charges present when the chip was removed from the packaging. This is a big problem when the air is very dry and if there is a tendency in the room for sparks to fly when walking across a carpet and touching a doorknob etc.It is always a good idea to follow ESD safe procedures to guard against possible damage to semiconductor devices. GL 73, Bob Johansen WB2SRF K2 S/N 5622 Staten Island, NY 10302 _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com