Hi Julius: Well this is weird. I also use N1MM all the time and can do FSK with a defined port with rig control. The USB adapter is a Keyspan USA 49WLC which I have used for several years. It has 4 serial ports defined on my laptop as com ports 4-7. I use com 4 for rig control and com 5 for CW. CW works FB, but so far, the rig control doesn't. I'm going to try a different serial cable on the off chance I grabbed a parallel cable instead of a serial cable !! :) Hey, been known to happen !
BTW, I loved your profile in NCJ ! 73, Jamie WB4YDL -----Original Message----- From: Julius Fazekas [mailto:[EMAIL PROTECTED] Sent: Friday, May 23, 2008 7:46 AM To: [EMAIL PROTECTED] Subject: [Elecraft] K3 interface with N3FJP FD software Hi Jamie, That sounds like a defined port address issue. Have had a similar problem with N1MM when trying to use an USB adapter. The logging software generally needs a defined port (COM1, COM2, etc.) to poll. Some USB adapters are able to do this and some are not. FYI I've been running my K3 at 38400 baud with N1MM without any issues thru a com port. I found a newer HP/Compaq laptop that had a serial port pretty cheap on ebay. 73, Julius Julius Fazekas N2WN Tennessee Contest Group TnQP http://www.tnqp.org/ Elecraft K2/100 #3311 Elecraft K2/100 #4455 Elecraft K3/100 #366 No virus found in this incoming message. Checked by AVG. Version: 8.0.100 / Virus Database: 269.24.0/1462 - Release Date: 5/23/2008 7:20 AM _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
