Bob, There are two approaches that will work to do automatic band switching with the K3 and PW-1. The first is to use something like the microHAM Band Decoder (or new Station Master which replaces Band Decoder) to convert the Elecraft (Kenwood) "IF;" CAT data to Icom CI-V Transceive broadcasts. The second would be to build a BCD to 1 of 10 decoder and use that to drive a voltage divider to create the Icom compatible "Band Select" voltage.
The Station Master will be available off the shelf after Friedrichshafen. I can supply notes on the BCD decoder approach but have not built/tested any devices. That is a "low tech" solution and not something microHAM is likely to produce and I'm not inclined to get involved in building "one off" units since that is a relatively high cost/low return proposition. 73, ... Joe, W4TV > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bob Serwy > Sent: Monday, June 02, 2008 11:24 AM > To: elecraft@mailman.qth.net > Subject: [Elecraft] K3 and Icom PW-1 > > > Any one has a K3 and a PW-1 hooked up for automatic band > switching of the PW-1? If so, how as it accomplished? > > Thanks > > Bob Serwy - N9RS _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
