Make sure Line Out in the K3 (CONFIG Menu) is set to NOR and with the level around 020. Also make sure the cable with the female pigtail is connected to the Line out jack of the K3 (some early K3 cable sets had the Line Out and Line In labels reversed).
73, ... Joe Subich, W4TV microHAM America http://www.microHAM-USA.com http://groups.yahoo.com/group/microHAM [EMAIL PROTECTED] > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Mike Kasrich > Sent: Saturday, July 19, 2008 9:20 PM > To: [EMAIL PROTECTED]; Elecraft > Subject: [microHAM] rtty and MK2R+ K-3 > > > Well audio can be found off the front headphone jack. Which > is totally > wrong. Audio should be coming off the back line in and out. > Something > is not right. I am using a Microham set of cables for the K-3. > > Is there a "trick" to shut off headphone audio and take it > off the back. > > Mike/aj9c > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com