I do something similar with ANT1 and ANT2 with ANT2 having an external tuner out at the antenna feedline base, and ANT1 always being tuned by the internal tuner, and would like some way to associate the ANT1 as AUTO and ANT2 as BYPASS (or vice versa), plus the ability to use it as it now is for those who don't have this sort of antenna set up. Just a thought.
73, Ken, NU4I -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, September 29, 2008 9:01 AM To: elecraft@mailman.qth.net Subject: [Elecraft] KAT3 settings saved per band I use two doublet antennas, one hooked to ANT1 through a balun for 40M which uses the KAT3 tuner, and a second (ANT2) in which I bypass the KAT3 and use an external Palstar BT1500A balanced tuner for 30-10M. Currently, when changing bands I have to remember to bypass/set the KAT3 correctly. I would like to see the KAT3 bypass/auto setting saved per band as is commonly done on other rigs, such as the IC756. Steve N9SZ _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com