Another thing about split operation is that the K3 defaults to using VFO B for transmit and A for receive. In the K2 A/B (I think) reverses these. This is a bit of a problem if you are using N1MM and running in split mode and tuning VFO A around. If you tune more than 300 Hz N1MM will toggle from Run to S&P mode. The workaround is to either widen the CW tolerance (Config -> Other) or turn off the Run/S&P Toggle (Alt-F11). (Thanks to K3CT for pointing this out to me.) Not a big deal but maybe being able to switch which is the transmit and which is the receive VFO in split mode would be nice. Cheers, Fred, KE7X
_______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
