Paul, Jim and everybody else: The discursion about mVs has been excellent and pretty much instructive but all I'd like to know is why I can use my handheld Marantz recorder with every single radio in my shack that has a line level audio output but I can't use it with my K3!
There is something else: when I plug a stereo cable from the k3's line out to the recorder's line in I have to change the recorder's input settings to MONO because with STEREO there is signal only on the left channel. Ok, the right channel is supposed to be used by the sub-receiver. But what if the sub-receiver is not installed? Just as additional info, I have here a Eton E1 receiver and it has line level out/in. It's manual (specifications) says: "Line Audio Output: 300 mV, 1K ohms for each output (left/right)." "Line Audio Input: 300 mV, 47K ohms." 73s André, PT7AT Matt Zilmer wrote: > > Thanks, both Paul and Jim for this information. Very useful and I'll > update my knowledge base with it! > -- View this message in context: http://n2.nabble.com/LINE-OUT-output-too-low--tp1656257p1670666.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
