Installing the KDVR3 is a nothing once the front panel is out and apart, tiny
board, one plug, one screw. Unless something is so seriously wrong with your
KDVR3 that is killing a voltage or a signal (really unlikely), just put it in
and then only turn on one at a time in the menu system until you are satisfied
with it.
73, Jim
----- Original Message -----
From: Dick Dievendorff
To: 'G4MKP' ; elecraft@mailman.qth.net
Sent: Friday, January 02, 2009 1:44 PM
Subject: RE: [Elecraft] KRX3 and KDVR - Installation Sequence
Both option installations require that you remove and reinstall the front
panel.
If it were me, I'd install them at the same time and only remove and
reinstall the front panel once.
I'd go through the two Option Assembly manuals and see that the steps to
remove and reinstall the front panel are quite similar.
If you're at all uncomfortable with this, or want to verify that one is
working before starting the other, then I'd do the KRX3 second receiver first.
Dick
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of G4MKP
Sent: Friday, January 02, 2009 11:30 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KRX3 and KDVR - Installation Sequence
My sub-receiver + filters and Voice recorder have been posted and are due any
day. Grateful for any recommendations of the sequence for installation of these
two.
One other question; Is it/will it be possible to activate the DVR via RS 232?
I'm thinking N1MM control and also a friend's logging application currently
under development?
Cheers,
Terry
G4MKP
------------------------------------------------------------------------------
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com