What's really fun is that you can adjust the AGC slope on the K3 in the 
config menu.  In fact, if you do this while listening to a very strong 
signal, you can hear exactly what the AGC does to reduce the gain while you 
are making the adjustment.    For this contest, I put in the maximum degree 
of attenuation, which helped control the strong signals.
  73, Andy, AE6Y

----- Original Message ----- 
From: "Darwin, Keith" <keith.dar...@goodrich.com>
To: "Elecraft Reflector" <elecraft@mailman.qth.net>
Sent: Tuesday, January 27, 2009 12:57 PM
Subject: Re: [Elecraft] Beware! (Learn by doing?) :-)))


> Call me dense, but I'm not understanding why one would expect that
> turning AGC off would NOT result in a huge jump in AF output.
>
> AGC turns down RX gain - a lot.  The only time there should be no change
> in AF output is when the RF input is so low that it hasn't reached the
> AGC threshold.
>
> Maybe other manufactures have coupled AGC on/off with AF attenuation, so
> if the AGC is off, AF output is automatically reduced by 20 dB or
> something.
>
> For this very reason, I always run with AGC on.  Even when I want the
> rig to act like it's off, I leave it on, set to Fast and then just turn
> the RF gain down to put my signal of interest down near the point where
> AGC is doing very little.  AGC is still on to protect me in case some
> big signal QRM or QRN shows up.
>
> - Keith N1AS -
> - K3 711 -
>
> -----Original Message-----
>> The "TenTec Orion" allowed the user to
>> shutoff the AGC @ will and the resulting big difference in audio was
>> NOT THERE!
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft@mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com 

_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to