Thank you Ken. Looks like it will be just fine then. Just built a FCC-2 MK-II a few weeks ago. It is a very nice DDS VFO.
73 Mike WE0H Ken K3IU wrote: > Hi Mike: > I got out a l'il FCC-2 freq counter/vfo that I built, hooked it up to > the K2 and was able to hear a signal on the K2 to down just below > 2740kc. The VCO unlocked just below that. At 3000kc the output power > was about 10 watts. I don't know what kind of sensitivity is available > in the K2 that far out of its specified band, but my guess is that it > should be OK for what you intend. > Good luck with the project. > 73, Ken K3IU > K2 #5413 > K3 #202 > > Mike-WE0H wrote: >> Building my K2 next week. I run 600 meters and use a homebrew >> transverter right now with my Kenwood HF rig. Going to build a new >> transverter for my K2 when it is finished. I ordered the transverter >> option. I need the K2 to function from 3.135mc to 3.510mc as I use a >> 3.0mc oven oscillator as my reference mixed with the HF radio's signal >> to get me on 2200, 1750 & 600 meters. I am licensed as a Part 5 station >> on those 3 bands. Will the K2 operate in that band at & below 80 meters? >> I only need the transverter ports to function, not the HF power amp. >> >> Many thanks, >> Mike >> WE0H ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
