Thanks Lyle. Does it mean that if Main is on 15 and sub is on 20 I loose signal on sub when I swap RX with A/B button?
73, Igor UA9CDC >> 1) I do not have KXV3 installed. I have one tribander connected to ANT1. >> Having tuned main RX on 20 using ANT1 I am trying to set SUB RX on 15m >> using the same antenna. Firmware does not allow that. > > Correct. If the Sub is tuned to a band higher in frequency than the Main, > the low pass filters in the shared antenna path attenuate the signals in > the Sub's band. > > If you are sharing an antenna, you must tune the Sub to the same band as > the Main, or a band lower in frequency. > > 73, > > Lyle KK7P > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html