Solder fumes are a well known decongestant. ;-) Darwin, Keith wrote: > So, how easy is it to build the K2? So easy, you can do it when you're > too sick to go to work :-) > > I'm not a kit builder. I built my K2 because I couldn't afford to pay > to have it done. I bought the pre-wound toroids and recommend them > highly. I also bought the unPCB kit which actually made the build time > longer due to initial prep work, but created a K2 that was more to my > liking. > > Anyway, about the time the K2 arrived I got sick. I was tired, and my > head was full of snot. One of those nasty colds where all you can do is > watch soap operas. Guess what, I found that the K2 took about the same > effort as watching TV. Read 1 paragraph. Blow nose. Find a part. > Locate the target location on the board. Blow nose. Mount part, double > check orientation, solder part. Blow nose. Check off step in the > manual. > > I move slowly and deliberately. It took me about 40 hours of build time > with my basic K2. I filled 1/2 a paper shopping bag with Kleenex and > had a wonderful K2 that worked perfectly the first time. >
-- R. Kevin Stover ACØH ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
