Sorry, that should be mn009; for TX EQ - mn008; is of course RX EQ. Can't see a way of doing it in Win-Test, Nick. One of the reasons why I abandoned my (paid for) Win-Test in favour of N1MM.
Peter Connors wrote: > I have identified an easy way to switch between various TX EQ settings > using N1MM or Logger32 thanks to information kindly supplied by Bill > Coleman N2BC, author of K3_EZ. > > The method involves using the macro functions in each program to set > compression and TX EQ bands. For example, flat with no compression in > Logger32 would be > $command cp000;mn008;swt53;mn255;$ > which zeroes compression, clears the existing EQ and tidily terminates. > > For my DX/Contest setting I use (the space after 'command' may appear as > a line feed): > $command > cp025;mn008;swt53;swt11;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;swt12;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;swt13;dn;dn;dn;dn;dn;dn;dn;dn;dn;swt24;dn;dn;dn;dn;mn255;$ > which sets CMP to 25, clears the existing EQ and then sets it to -16, > -16, -9, -4 in the first four bands and then exits gracefully. > > The N1MM macros need starting with {CAT1ASC instead of $command, then > terminating with } instead of $. > Other EQ settings can be easily set by examining the K3 Programmers > Reference; a macro that needs very many commands may exceed the maximum > length which is 255 in N1MM, unknown for Logger32. > Although the Programmers Reference suggests that successive SWTxxx > commands may need 100msec delay to 'set', these macros work with the COM > port at 38400 without any apparent need for command pacing. > > 73, Pete Connors F5VNB/G4PLZ > PS I have just read Wayne's mail about keeping EQ settings within ±6dB > so I am about to change the macros after writing this. Perhaps Wayne > will reduce the limits in future firmware? > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html