Doug Person wrote: > Hi Folks, > > Installing the KPA3 and KAT3 is pretty straight forward. That's why I > don't understand what's wrong. Looks like ANT1 and ANT2 are both open. > I can see the leads physically connected in the right order to the > KAT3. The KAT3 is enabled in the menu, as is the KPA3. But when I > tried to run the calibration program, it says the SWR is too high. When > I attempt to transmit with just 5 watts, the internal SWR meter > indicates very high SWR.
Make sure that the connector on the bottom of the KAT3 is lined up properly. I succeeded in getting it wrong once (although I noticed it before trying it out, so I don't know if this is the symptom you'd see). -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html