I removed the KAT3 and reinstalled the KANT3. SWR now normal. Doug -- K0DXV > > > > At 22:59 07/27/2009, you wrote: >> Hi Folks, >> >> Installing the KPA3 and KAT3 is pretty straight forward. That's why I >> don't understand what's wrong. Looks like ANT1 and ANT2 are both open. >> I can see the leads physically connected in the right order to the >> KAT3. The KAT3 is enabled in the menu, as is the KPA3. But when I >> tried to run the calibration program, it says the SWR is too high. When >> I attempt to transmit with just 5 watts, the internal SWR meter >> indicates very high SWR. >> >> I admit that I am recovering from major surgery (with the usual >> assortment of drugs) and my brain may not be fully functional yet, but I >> can't see what I may have done wrong... >> >> Any thoughts? >> >> Thanks, >> >> Doug -- K0DXV >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > >
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html