Have you tried starting with a different power level setting on the front panel control? I've had a similar problem and that fixed it.
Alternatively, have you tried manual gain calibration? 73 Dave, G4AON K3/100 #80 ------------------- I assembled a K3/10 + KBPF3 + AM filter (+ default 2.7Khz filter). After synth calibration, filter setup, ref oscillator calibration I performed TX gain calibration using Electraft K3 utility, but it fails immediately with *ERR TXG*. Filter setup is Fil1: none Fil2: 6.0Khz (0hz), 0db Fil3: 2.7 (-0.85Khz), 0dB Any idea of what the problem could be? Thanks Eric ve2shf ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html