G'day, To hopefully settle this, at least for my own case, I reloaded Beta 3r19 and did the following test:
14195kHz SSB, AGC F. S7 signal from my K2. With my line out setting this gave a -46dB signal displayed in Spectrogram 16. Applying auto notch reduced this to -87dB or better. Reloaded Beta 3r25. With the same set up the signals displayed were -46dB notch off, -72dB notch on. I conclude that something significant has changed with auto notch. Regards, Mike VP8NO ----- Original Message ----- From: "Ron D'Eau Claire" <r...@cobi.biz> To: "'hb9brj'" <hb9...@gmail.com>; <elecraft@mailman.qth.net> Sent: Sunday, August 16, 2009 4:21 PM Subject: Re: [Elecraft] Auto-Notch Broken in 3.25 (I probably missed this) > Strange - it works just as described in the Owner's manual here: > auto notch > on SSB, manual (only) on AM/CW/DATA. > > Is it possible your AGC was turned off? > > Ron AC7AC > > -----Original Message----- > > Dick Roth KA1OZ wrote: >> >> Tried listening for the Elecraft SSB net at 1800. There was a >> heterodyne or other interfering signal on 14.316. I tried to use >> Auto-Notch, but nothing changed. Then I went to manual and >> notched it >> out completely. >> > > Same thing here. Auto Notch is gone in 3.25. > > 73, Markus HB9BRJ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html