Dick Roth, KA1OZ wrote: > Ron D'Eau Claire wrote: >> Strange - it works just as described in the Owner's manual here: auto notch >> on SSB, manual (only) on AM/CW/DATA. >> >> Is it possible your AGC was turned off? >> >> Ron AC7AC >> >> -----Original Message----- >> >> Dick Roth KA1OZ wrote: >>> Tried listening for the Elecraft SSB net at 1800. There was a >>> heterodyne or other interfering signal on 14.316. I tried to use >>> Auto-Notch, but nothing changed. Then I went to manual and notched it >>> out completely. >>> >> Same thing here. Auto Notch is gone in 3.25. >> >> 73, Markus HB9BRJ > > AGC is on. Here are the settings: > > AGC Delay nor > AGC Hold 000 > AGC PLS nor > AGC SLP 002 > AGC THR 008 > AGC-F 140 > AGC-S 010 > > Otherwise, the function appears to work properly when in manual mode. >
I, too, went back to 3.19. Auto-notch works as it always did before I loaded 3.25. My rig is a pretty early one, serial 859, with no mods performed since the original build. Never did the mods because I never saw the need. After an early failure of the front panel, the radio has been performing flawlessly. I couldn't be more pleased! But, I'll have to see how things fall out to determine whether to stay with 3019 and have auto-notch or go forward again to 3.25 to enjoy the improved NR. -- 73, Dick ka1oz Middleborough, MA Radio: Elecraft K3/100(Kit) SN 859 Antenna: Titan-DX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html