Hi Matt: I'm CCing the reflector in case someone else has the same question.
W8ESE wrote: >Tom, do you have the artwork/CAD file that you could make available if >someone wanted to reproduce these? OH ABSOLUTELY! I'd be HAPPY(!) to provide you (or anyone else for that matter) with the artwork required to produce a PC board via the photo-etching process. I can supply B&W artwork at either 1X or 2X (or some other magnification if you prefer), and at 300 or 600 DPI resolution. I usually send these out as PDFs which can be printed directly onto either plain white paper or onto clear acetate (for directly making a negative if you do your own contact exposure of the negative to home-etched pre-sensitized PC board). I'd need to know whether you want a photo positive (black where copper is to remain), or negative (white/clear where copper is to remain). The process (KPR-4) which I use required a photo-negative image, but many others use a photo-positive working resist. If you can accept a PDF and print your own master images, there's no charge for the images. IF I have to print and mail them to you, there will be a nominal printing/mailing charge required. I have a number of other PC board designs for which this offer holds as well. 73, Tom Hammond N0SS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
