The bandwidth appears to be limited when using 10 hz and it is painfully slow when the bandwidth is fairly wide.
When I am in PSK or RTTY and using search and pounce, I use wide bandwidth in HRD and DM780 to find the signal I want on the screen and then narrow it in so it is better for me to have 50 when wide and then 10 when much narrower so I wind up switching all the time. What would be really nice, if possible, is to auto change to 10 hz shift when you adjust your width below (pick a number) 200 or so and back when you go above that width (optionally?). (A single button would work too, guess I will have to figure out how to do that.) Thanks es 73, de Jim KG0KP ----- Original Message ----- From: "Joe Subich, W4TV" <li...@subich.com> > The only problem is that 10Hz steps limit the range of Fc ... > when Wayne eliminates or relaxes the restriction, you will be > correct as far as operation with Commander is concerned. Now, > If Wayne would add a "set" command to allow direct access to > 10/50 Hz, perhaps we could convince Dave to link the radio > button to it <G>. > > 73, ... Joe, W4TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html