> I have the same setup as you (HRD /DM780) and the same thing happened > when I upgraded to 3.63. > The transmit light stayed on at the end of PSK transmissions. I fixed it > by changing PTT options in DM780 > to serial port instead of through HRD. This definitely happened after > upgrading to 3.63. I don't know if this > is a permanent fix as/ /I am worried about conflicts with HRD rig > control as it uses the same port. So far so good though.
Please carefully check the configurations in HRD, DM780 and the K3. Assume they all changed to something you didn't want, and verify they are all exactly as you really want them. There have been changes in the K3 firmware, changes in HRD, and changes in DM780 in the past few months. Occasionally, upgrading the K3 firmware has apparently resulted in unexpected configuration changes in some isolated cases. Rather than go back to older firmware, just scroll through all the OCNFIG settings and be sure they are what you want, and that they do what you expect. The K3, HRD and DM780 will all work well together. 73, Lyle KK7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html