Hi Bill, Try over here:
http://code.google.com/p/powersdr-if-stage/ 73! Lee WW2DX On Dec 15, 2009, at 12:54 PM, Bill Davis Jr wrote: > > Hope someone can help. Downloaded PSDR-IF 1.19.02 last night to use with my > K3 and my Softrock on the IF with a Clifton Labs buffer. No problem with > using the panadapter centered on the IF. But when I selected the K3 IF > setting in PSDR and hooked up the serial cable I expected to be able to do > some K3 control via PSDR and that does not happen. The serial cable works > fine with the K3 Utility. I'm guessing I have made a dumb error some where. > Correct Com port (1) and only serial cable hooked to computer when I was > trying it. > > Ideas? .... From PSDR-IF documentation it sounded like once the IF/K3 option > was selected it should have been close to "plug and play". My serial cable is > 2 conductor and ground. Again works fine with K3 Utility and I have Upgraded > FirmWare etc with no issues. > > Thanks .. Bill K0AWU EN37ed K3# 3460 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
