Hi Bob, Thanks for your e-mail.
Kok Chen emailed me privately with the cause of the problem: >AFSK-A requires that you to use the same >transmit tone pair on your sound card as in the rig. I.e., if you set >the rig to use the 2125/2295 tone pair, your software needs to also >use that tone pair. > >DATA-A does not have such a requirement. Cheers, Frank At 19:59 10/02/2010, Bob - W0GI wrote: >AFSK A and DATA A both transmit the same on mine. Using HRD here. > >I don't have the solution, but you are correct in that your K3 is not >operating properly. > >73 Bob >-- >View this message in context: >http://n2.nabble.com/AFSK-A-not-working-while-DATA-A-is-tp4549740p4550024.html >Sent from the Elecraft mailing list archive at Nabble.com. >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html --- drs. ing. Frank R. Oppedijk Avista B.V. Oostvaardersdiep 9 1309 AA Almere tel: 036 - 737 00 55 GSM: 06 - 26 214 365 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html