Paul, There will be no impact to what you have done already - but if you had not found that error, your K2 keying would have been really messed up.
73, Don W3FPR Paul Huff wrote: > As I worked today on adding more parts to RF board of my K2 I discovered that > quite some time ago I had installed a 22 uF electrolytic at C111 instead of > the > correct 2.2 uF. The wrong part was easily removed and installed in it's > correct > place as C125, and the 2.2 uF was put in at C111. > > Here is my question... Since the wrong part was in place while I did the > Part > II testing and alignment (PLL, BFO, etc.) will these alignment settings need > to > be redone now that the correct value is in place? During the alignment > everything seemed to go exactly as specified. The schematic shows C111 > (along > with Q23 and R113) has something to do with the signals to and from the > control > board marked 8T and 8R. I think that 8T and 8R have something to do with T/R > switching so I am probably OK on this but I thought that I would play it safe > and ask the experts. > > Thanks in advance for any input that you might have! > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html