Have you recalibrated the S-meter since you did the RF Gain Cal on the K3? I found that to be necessary. 73, Ken K3IU ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On 4/24/2010 8:36 AM, Ian Maude wrote: > Hi all, > I have been playing with the RF gain calibration procedure on my K3. I have > used my XG1 as a signal source after fitting a new battery :) > What I found had surprised me. If I turn down the RF gain, I cannot > completely lose a signal. The RF gain will not move the s-meter about about > s7. Now obviously the rig is much more quiet but it seems to me that this > is incorrect. If I use the factory default settings, the RF gain acts in > the way I would have expected. I am fairly confident that the XG1 is OK. > That is I see s9 on several rigs for 50uV. > I would appreciate your thoughts :) > > 73 Ian > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html