On 5/3/2010 9:50 AM, Jim Brown wrote:
> Nearly all radios and ham logging software use only pins 2, 3,
> and signal return for radio control and information. The K2 uses
> the other pins on its DB9 connector for other functions that are
> VERY different from the RS232 standard.
I'm using MixW as my data and logging program with my K2/100
and the KIO2 "special cable" for several years now. Up to now
I haven't been using the CAT function for frequency tracking,
but I do want to start. The COM port works fine for PTT rig
control.
Pardon me if I ask a "newbie" question, but what settings in
the K2 menu do I have to check/change to implement this. If
it's documented somewhere please point me to it.
With thanks.
-- 73 de K2ASP - Phil Kane
Elecraft K2/100 s/n 5402
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
