Very sorry, once I'd read if after you'd sent it, I understand my mistake. In 
which case I agree it’s a good thing.

Wayne, sorry to doubt you, my master. I shall not travel the path of the dark 
side!
73 de M0XDF, K3 #174
-- 
Cats know exactly how we feel.  They don't give a damn…
but they know.

On 18 May 2010, at 20:31, The Smiths wrote:

> 
> This is for the TX INHIBIT ONLY, not for TEST mode.  If you don't change it 
> in your CONFIG menu, and you only HOLD the Band button to put yourself in 
> TEST mode you have nothing to worry about.  It still works the same.  You 
> will hear your tones.
> 
> 
> 
> 
> 
>> From: m0...@alphadene.co.uk
>> Date: Tue, 18 May 2010 20:19:32 +0100
>> To: elecraft...@yahoogroups.com
>> CC: elecraft@mailman.qth.net; elecr...@yahoogroups.com
>> Subject: Re: [Elecraft] [Elecraft_K3] K3 Firmware Rev. 3.97: new DSP NB 
>> algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.
>> 
>> Wayne, does this meen I can't here the keyer when I'm in TX INHIBIT?
>> 
>> I use it as a way of practicing my keying, which isn't up to much yet, but 
>> if you've stopped the feedback, I can't do that any more.
>> 
>> Also, it means I can't check my monitor level before going into VOX!
>> 
>> To me this is a regrade step to satisfy those that don't look at the display.
>> 
>> It would have been better to send a double-bleep or something as you 
>> attempted to go into transmit.
>> 
>> Can this be made an option please?
>> 73 de M0XDF
>> -- 
>> Times are bad. Children no longer obey their parents, and everyone is
>> writing a book. -Marcus Tullius Cicero, statesman, orator and writer
>> (106-43 BC)
>> 
>> On 18 May 2010, at 20:06, Wayne Burdick wrote:
>> 
>>> * TX INHIBIT IMPROVEMENT: If TX INH is active (see
>>> CONFIG:TX INH), voice monitor and CW/DATA tones are disabled,
>>> giving the operator audible feedback about inhibited status to
>>> supplement the flashing “TX” icon.
>> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to