Thanks guys. Maybe this old dog is still young enough for new tricks. Perhaps I'm not too old to change! ;o)
Terry, WØFM -----Original Message----- From: Phil LaMarche [mailto:plama...@verizon.net] Sent: Tuesday, June 08, 2010 1:31 PM To: d...@w3fpr.com; 'Terry Schieler' Cc: elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 and N3FJP Logging Another program that I absolutely love is Comm Cat. Works perfectly with the K3. Look at the running DX list, click on the one you want and the radio changes to match what he's doing at his end. Also logs and many other great features. Phil Philip LaMarche LaMarche Enterprises, Inc p...@lamarcheenterprises.com www.LaMarcheEnterprises.com 727-944-3226 727-937-8834 Fax 727-510-5038 Cell www.w9dvm.com K3 #1605 CCA 98-00827 CRA 1701 W9DVM -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Tuesday, June 08, 2010 2:19 PM To: Terry Schieler Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 and N3FJP Logging Terry, Other software packages can do what you are expecting of ACLog, so I surmise that it is an ACLog problem. I have seen reports that a few applications try to send the frequency and mode changes in the wrong order and the K3 does not behave as expected. If you want substantiation, download and install HRD or N1MM and you will see that the K3 is quite responsive to frequency and mode changes. OTOH, you may have some sort of setup problem in the software too, check with the author of the software. 73, Don W3FPR Terry Schieler wrote: > I use N3FJP's logging software, ACLog. Years ago, I helped Scott, the > author, debug his software to do CAT with my FT1000MP. Everything > worked very well. I could click on a DX spot in his program and my > FT1000MP would instantly change to the frequency and mode of the spot. > Since I've had my > K3 (#474) I haven't bothered to set up the ACLog software to talk to > the rig until about a month ago. Now I notice that the rig is not > changing to the mode that is "presumed" for that particular spot > frequency. If I click on a spot on 7.025 and the K3 is in SSB mode on > 20M, it switches to the correct frequency (7.025) but it stays in SSB > mode. My FT1000MP will instantly change the mode to CW for the presumed band plan. > > > > I've selected "Elecraft" in the ACLog software rig setup dropdown menu. > Maybe it should be "Kenwood". If you are using your K3 with N3FJP's > logging software I'd appreciate it if you would please contact me > directly and share your settings. > > > > Also, are any other K3 users experiencing an annoying 3-4 second delay > in the K3 changing to a new DX spot when selected in ACLog? My 1000MP > was instant. My K3 really drags its feet making the DX spot change. > Is this an ACLog issue or a K3 issue (or an OPERATOR issue)? :o) > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
