Bob,

Yes, the best and easiest way to determine what is wrong is to do 
Receiver Signal Tracing.  That should allow you to isolate the problem 
to a single stage and armed with that information, we can likely help 
better.

You do not need a 10 MHz crystal.  Any crystal frequency within the 
tuning range of the K2 will do just as well.  The 10 MHz crystal is 
suggested if you have no other - they are inexpensive and commonly 
available from a number of sources.

You will also have to build up an RF Probe (or use a 'scope).  The parts 
to build an RF Probe were included with your K2 kit.

73,
Don W3FPR


Bob wrote:
> Greetings,
> I just finished building my K2 and seems to work pretty well except
> that it does not received like I think it should.  I put it side by
> side with my K1 and the K1 picked up signals better.  They were louder
> and clearer on the K1 than the K2.  I have made about 3 passes through
> the alignments and am comfortable with those. The S meter, when I am
> listening to a strong signal, will barely come off the first bar. All
> of the resistance and voltage checks along the build have come out
> fine.  I am now deciding how to attack this issue and would appreciate
> any suggestions anyone has.  I am going to be doing some of the
> voltage checks from the back of the manual next week and also seeing
> if I can find a 10 MHz crystal to make the signal generator to begin
> that process.
> Thanks in advance for any thoughts
>
> 72/73
> Bob, AD7BP
>
> "You are boldly going where no man knows what he is doing"  -Maarten
> Schmidt, Palomar astronomer-
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to