Which operating system? Most soundcards will default to monitoring on the line input. If you're using Vista or Windows 7, open the Audigy 2 ZS Speakers. Select the levels tab and make sure all of the devices below the line (all of the inputs) are muted. In Windows XP, I think you need to open the "Advanced" features and turn off "monitor while recording" (or select "do not monitor while recording") or something similar.
73, ... Joe, W4TV On 7/3/2010 7:56 PM, GD0TEP wrote: > Hi to the group, > > I have connected my K3 to my PC so I can use WSJT, my sound card is the > 'Sound Blaster Audigy 2 ZS Audio' > > I seem to have some sort of audio feed back when I get the radio to TX. > > The sound card output is directly connected to the K3, and for the moment > PTT keying is via a USB micro ham unit. > > When I use the microham device router to test the system by TXing a test > signal (standard single tone) all 'appears' to be OK, but, what I hear (from > the monitor in the K3) is a little distorted, and this distortion gets worse > the higher the MON is set at (currently at 10) once MON goes higher than 15 > or 16, I can hear distortion. > > I thought it was perhaps an issue with the sound card, so I've tried the > 'built in' card on the PC and there's no difference. > > My next thought is that it's a setting I'm missing within the K3, but I > can't see what... > > MON = 10 > LINE = 36 but altering this doesn't affect the signal distortion > > There also appears to be a delay in sending tones from WSJT, I'm sure that > this is a software issue, but in this delay there's about a second of what > can only be described as hash. > > Anyone got any suggestions on what I can check next?? > > 73, > Andy > http://gd0tep.com > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html