You say the power output stays the same. Is this into a dummy load and measured with a good RF watt meter (like Bird)? If that is the case then due to power staying the same, the resistance the PA sees must be decreasing. Is this happening on all bands or just one or two? This could be related to the LPF causing it if only one or two, need to check those items in the LPF causing it. If it is all bands, I would check the items on the output side of T2 for correct value and soldering. -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-10W-PA-problem-tp5282243p5282647.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html