I found in my shack a Front End Saver http://www.radio-ware.com/products/fes.htm that I never installed.
Seems is similar to this made from ICE, at least will add extra protection to the K3, what do you think? Or it will decrease the RX signals I can receive in the K3? Thanks, Jorge CX6VM/CW5W -----Mensaje original----- De: Brett Howard [mailto:br...@livecomputers.com] Enviado el: Domingo, 11 de Julio de 2010 10:29 p.m. Para: Jorge Diez - CX6VM CC: 'Tom W8JI'; 'Elecraft Reflector' Asunto: Re: [Elecraft] continuous relay click in RX ANT IN I had this going on too and a really slick way to fix the problem is with an RF limiter... http://www.iceradioproducts.com/reconly.html#rflimiter I.C.E. makes a very cost effective unit that gets the job done very well... I ordered the 196 unit and then I didn't want to have it with RCA connectors on it so I asked them to build it wit the BNC connectors like they do on the VHF unit. They had no problem with that and did so no extra cost. ~Brett (N7MG) On Sun, 2010-07-11 at 18:27 -0300, Jorge Diez - CX6VM wrote: > ems is the proximity of the antennas. > > I was using a sloper for 160 mts from a 118ft tower and the 40-2CD was > on > top of this tower. > > So I couldnt connect the 40-2CD in the RX ANT IN. > > So I switch the knob in my sixpack to listen in the 40 and then switch > again > to TX on the 160 antenna, hope this will not cause a problem in the > rig? > > Thanks! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html