Don, Thank you for the help, and I did just that, tore the envelope up and it still wasn't there. Radio is waiting, its ok, its been weeks, it will wait 1 more day.
-Neil On Thu, Jul 22, 2010 at 8:29 PM, Don Wilhelm <w3...@embarqmail.com> wrote: > Neil, > > The resistance is not critical, so if you have a resistor (of any > tolerance) between 4.7k and 6.8k on hand use that. > > Did you have a tan envelope on the package with the 8 jumpers for the > microphone configuration header? If so, look very carefully in that > envelope, the resistor can get twisted inside and will not fall out - tear > the envelope open if necessary. > > 73, > Don W3FPR > > Neil Shubert wrote: > >> Hi ALL >> >> I got my MH2 mic or the k2 and there was no resistor in the box ACK! >> >> I know its a 5.6K Green Blue red, and its a 1/4 watt but is there a >> better >> choice? >> >> and should I get a gold or a silver tolerance? >> >> Off to the telephone shack tomorrow >> >> -Neil >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
