Hi Ben, yes, we can help, Jake. On Mon, Oct 5, 2009 at 1:59 PM, Lincoln Bollschweiler < [email protected]> wrote:
> Hi Ben, > > > > I’m sure that most of Jake’s students (myself included) could likely answer > any questions you may have regarding fabrication as well as a number of > other issues. That being said, you may find the information you may find > yourself needing on the CMOSedu google group. You can find information on > that group on CMOSedu.com as well. > > > > Good luck! > > Lincoln > > > ------------------------------ > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Ben Cooper > *Sent:* Monday, October 05, 2009 1:48 PM > *To:* [email protected] > *Subject:* Re: Having MOSIS Make a chip > > > > Jake > > I found your site after I had submitted this email. I wish to thank you for > the wealth of information you have provided. I am studing it now. I may have > some questions concerning going to chip, would you be available to answering > a few questions if they come up? > > Ben Cooper > > 2009/10/5 Jake Baker <[email protected]> > > Ben, did you see: http://cmosedu.com/cmos1/mosis/mosis.htm There is some > useful information there, Jake. > > > > On Mon, Oct 5, 2009 at 10:25 AM, ben <[email protected]> > wrote: > > > I have laid out a new digital product using Electric and tested in > ngspice. I am planning to go to MOSIS to have chips made. However, > this is my first time through the process and am looking for some > advice and suggestions from anyone who have already created a chip > from a GDS produced in Electric. More importantly, I am looking for > advice on what not to do. The goal is to improve my chances for > success. > > As for the technology to which I plan to use, I am open to > suggestions. I figure I will start with older and larger technology to > improve the chances for success. But again, I am open to suggestions . > > > > > -- > > http://CMOSedu.com/jbaker/jbaker.htm > > > > > > > > > -- http://CMOSedu.com/jbaker/jbaker.htm --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Electric VLSI Editor" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/electricvlsi?hl=en -~----------~----~----~----~------~----~------~--~---
