Sorry for the post without attachment as I found out that I'm not able to attach files with the post as its causing ' *#340 error while communicating with the server! '* What to do?
On Wednesday, March 20, 2013 12:50:54 AM UTC+5:30, Saraslife wrote: > > Hello, > I checked every file in the library is contained in the same folder. > Also, each sub-circuit is working perfectly independently. > I am not able to find out the cause of the error in the LTSpice! > > Kindly, have a look at the library file attached to the post. > > On Tuesday, March 12, 2013 11:56:22 AM UTC+5:30, Ayatullah wrote: >> >> Hello, >> >> LTspice is not able to find the subcircuit.Usually, you have to place >> every module in the same folder. In case it still doesn’t solve the >> problem, kindly share your jelib file. >> >> >> On Tue, Mar 12, 2013 at 11:48 AM, Saraslife <[email protected]> wrote: >> >>> I have designed a Carry Look Ahead Adder using NAND and NOR gates. The >>> schematic is perfect, simulation results are correct. >>> >>> Now, while simulating layout, LTSpice gave an error saying "unknown >>> subcircuit called in". >>> >>> I have individually simulated each sub-circuit used in the design, no >>> errors was encountered. Also, there is no problem with DRC & NCC. The >>> schematic matches with Layout in all respects. >>> >>> Kindly, post if you can diagnose the location of the problem or you >>> suffered the same problem. I really need to find the solution. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Electric VLSI Editor" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >>> >>> >> >> >> >> -- >> Best Regards, >> >> >> Mohammad A Maktoomi >> M.TECH(Electronic circuits & systems design) ,2011-2013 >> Electronics Engineering Department >> Aligarh Muslim University >> INDIA-202002 >> www.maktoomi.blogspot.com >> Contact: +91-9540642271 >> ***************************** >> > -- You received this message because you are subscribed to the Google Groups "Electric VLSI Editor" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
