Hello Gavin, thank you for the help.
In fact, the Antenna Error in the library you sent is detected only by version 9.05, not by version 9.06. Another doubt: the error message says that perimeter-area is 8056. What means this parameter "perimeter-area"? I noted that it is different from the area, since the area of Metal1 is about 6008 (1502 * 4). Regards, Estevao Em sábado, 15 de agosto de 2015 10:57:13 UTC-3, Estevao Teixeira escreveu: > > Hi everyone: > > I've tried to force an antenna error in my designs, just to verify if this > checking is working well in Electric. I'm using the MOCMOS technology, with > 3 layers of metal. > > I've making cells with intentionally long layers of poly1 or metal1, > connected only to the gates of small MOSFETs. Curiously, when running the > Antenna rule check, the software never points any antenna rule violation. > > Can anyone explain what I should do to perform this test (preferably to > find the errors)? Can anyone send me a cell with an antenna rule violation > example? > > Thank you. > > Estevao > -- You received this message because you are subscribed to the Google Groups "Electric VLSI Editor" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
