Thanks for the update! I will build it and test it. However, my knowledge is limited. Are there any resources that you recommend?
On Thu, Apr 10, 2014 at 3:30 PM, Darren Hart <[email protected]> wrote: > Just FYI. I've updated the dora branch with the new meta-data and updated > the kernel to 3.10.35-LTSI. I've pushed and tagged this as > 1.0-rc1-dora-10.0.1. This is pending final AB builds, but I don't expect > any changes between rc1 and 1.0 - unless testing here indicates a need. > > This includes the CONFIG_USB_ACM module. I'd appreciate a build and test > to confirm this resolves the request. > > On 4/9/14, 22:53, "Koen Kooi" <[email protected]> wrote: > > >Normally the autobuilder will build do a nightly build for 'dora' once > >every week, but with the heartbleed issue there will be multiple builds > >this week. > > > >Op 10 apr. 2014, om 01:52 heeft Darren Hart <[email protected]> het > >volgende geschreven: > > > >> I expect the meta-minnow/dora branch to be ready by Friday if not > >>earlier. You'll need a response from Koen on the Angstrom ETA and update > >>mechanism. Also depends on which Angstrom image you are running. > >> > >> You can also build the image yourself using the Angstrom build scripts. > >> > >> -- > >> Darren Hart Open Source Technology > Center > >> [email protected] Intel > Corporation > >> > >> From: Suresh Ratnam <[email protected]> > >> Reply-To: MinnowBoard Development and Community Discussion > >><[email protected]> > >> Date: Wednesday, April 9, 2014 at 15:30 > >> To: MinnowBoard Development and Community Discussion > >><[email protected]> > >> Subject: Re: [MinnowBoard] [Help] Communicating with an Arduino Based > >>Autopilot > >> > >>> Thanks! Can I get an ETA for the update so that I can make decisions > >>>for this project. The communication between the two is the last piece. > >>> Also, how would the update be applied? Is it through opkg upgrade or > >>>do I need to update the kernel? > >>> Once again, I appreciate the help > >>> On Apr 9, 2014 2:34 PM, "Darren Hart" <[email protected]> wrote: > >>>> I verified that it was missing from the BSP and I have submitted the > >>>>meta > >>>> data to add it to the linux-yocto repository. Once that merges, I'll > >>>> update the meta-minnow/dora branch to include it. At that point, I'll > >>>> likely tag and release minnow/dora and request Koen kick off new > >>>>Angstrom > >>>> builds for dora. > >>>> > >>>> -- > >>>> Darren > >>>> > >>>> On 4/9/14, 11:26, "[email protected]" <[email protected]> wrote: > >>>> > >>>> >No, it has nothing to do with opkg. CONFIG_USB_ACM is the kernel > >>>>config > >>>> >option that's required to have the cdc-acm driver built. > >>>> > > >>>> >Darren can add it in the BSP to make the module available. > >>>> > > >>>> >On 09/04/14 18:45, Suresh Ratnam wrote: > >>>> >> Thanks selsinor. I read up on that and try it later today. > >>>> >> Is it through opkg or are the specific steps? > >>>> >> > >>>> >> On Apr 9, 2014 11:12 AM, <[email protected]> wrote: > >>>> >> > >>>> >>> CONFIG_USB_ACM will enable it, but really you probably want to > >>>>enable > >>>> >>>as > >>>> >>> modules drivers for every usb device you can. > >>>> >>> > >>>> >>> > >>>> >>> On 09/04/14 17:16, Darren Hart wrote: > >>>> >>>> This is very likely due to that particular driver not being > >>>>included > >>>> >>>>by > >>>> >>> the > >>>> >>>> BSP. You can verify by determining the specific CONFIG required > >>>>and > >>>> >>>> verifying it is or is not in your kernel config > >>>>(/proc/config.gz). If > >>>> >>>>it > >>>> >>> is, > >>>> >>>> you can verify in the driver source fi the vendor/product ID is > >>>> >>> supported by > >>>> >>>> the driver. > >>>> >>>> > >>>> >>>> I suspect you just need to build the driver. If you find the > >>>>CONFIG is > >>>> >>>> missing, just let me know what it is you want added and I'll > >>>>update > >>>> >>>>the > >>>> >>> BSP. > >>>> >>>> In the mean time, you can install the kernel dev packages and > >>>>build it > >>>> >>>> yourself. > >>>> >>>> > >>>> >>>> We have 3.10-LTSI support in the dora branch of the minnow BSP > >>>>layer > >>>> >>>> currently. I was about to tag it and release it, but let's make > >>>>sure > >>>> >>>>it > >>>> >>> has > >>>> >>>> the support you need first. If not, I'll add it first. > >>>> >>>> > >>>> >>>> > >>>> >>>> > >>>> >>>> _______________________________________________ > >>>> >>>> elinux-MinnowBoard mailing list > >>>> >>>> [email protected] > >>>> >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > >>>> >>>> > >>>> >>> > >>>> >>> _______________________________________________ > >>>> >>> elinux-MinnowBoard mailing list > >>>> >>> [email protected] > >>>> >>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > >>>> >>> > >>>> >> > >>>> >> > >>>> >> > >>>> >> _______________________________________________ > >>>> >> elinux-MinnowBoard mailing list > >>>> >> [email protected] > >>>> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > >>>> >> > >>>> > > >>>> >_______________________________________________ > >>>> >elinux-MinnowBoard mailing list > >>>> >[email protected] > >>>> >http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > >>>> > > >>>> > >>>> > >>>> -- > >>>> Darren Hart Open Source > >>>>Technology Center > >>>> [email protected] Intel > >>>>Corporation > >>>> > >>>> > >>>> > >>>> _______________________________________________ > >>>> elinux-MinnowBoard mailing list > >>>> [email protected] > >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > >>> _______________________________________________ elinux-MinnowBoard > >>>mailing list [email protected] > >>>http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > > > > > > > -- > Darren Hart Open Source Technology > Center > [email protected] Intel > Corporation > > > > _______________________________________________ > elinux-MinnowBoard mailing list > [email protected] > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >
_______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
