I wasnt able to build an yocto project test image. However, I did manage to build an Angstrom image with this BSP layer. It supports the ttyACM0 connection to the APM 2.6. Thanks for all the help!
On Thu, Apr 10, 2014 at 4:46 PM, Suresh Ratnam <[email protected]>wrote: > Thanks for all the help! I will get on it > > > On Thu, Apr 10, 2014 at 4:35 PM, Darren Hart <[email protected]>wrote: > >> If you want to build Angstrom, it provides setup scripts. Start at: >> http://www.angstrom-distribution.org/ >> >> If you want to just build a Yocto Project test image (like core-image-base >> or core-image-sato) see the README in meta-minnow: >> http://git.yoctoproject.org/cgit/cgit.cgi/meta-minnow/tree/README?h=dora >> >> If you have never built with Yocto before, I suggest the Quick Start guide >> here: >> >> https://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs >> .html<https://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html> >> >> -- >> Darren Hart Open Source Technology >> Center >> [email protected] Intel >> Corporation >> >> >> >> From: Suresh Ratnam <[email protected]> >> Reply-To: MinnowBoard Development and Community Discussion >> <[email protected]> >> Date: Thursday, April 10, 2014 at 15:22 >> To: MinnowBoard Development and Community Discussion >> <[email protected]> >> Subject: Re: [MinnowBoard] [Help] Communicating with an Arduino Based >> Autopilot (Minnow 1.0 dora RC1 BSP) >> >> >> >Thanks for the update! I will build it and test it. However, my knowledge >> >is limited. Are there any resources that you recommend? >> > >> > >> > >> >On Thu, Apr 10, 2014 at 3:30 PM, Darren Hart <[email protected]> >> >wrote: >> > >> >Just FYI. I've updated the dora branch with the new meta-data and updated >> >the kernel to 3.10.35-LTSI. I've pushed and tagged this as >> >1.0-rc1-dora-10.0.1. This is pending final AB builds, but I don't expect >> >any changes between rc1 and 1.0 - unless testing here indicates a need. >> > >> >This includes the CONFIG_USB_ACM module. I'd appreciate a build and test >> >to confirm this resolves the request. >> > >> >On 4/9/14, 22:53, "Koen Kooi" <[email protected]> wrote: >> > >> >>Normally the autobuilder will build do a nightly build for 'dora' once >> >>every week, but with the heartbleed issue there will be multiple builds >> >>this week. >> >> >> >>Op 10 apr. 2014, om 01:52 heeft Darren Hart <[email protected]> >> het >> >>volgende geschreven: >> >> >> >>> I expect the meta-minnow/dora branch to be ready by Friday if not >> >>>earlier. You'll need a response from Koen on the Angstrom ETA and >> update >> >>>mechanism. Also depends on which Angstrom image you are running. >> >>> >> >>> You can also build the image yourself using the Angstrom build >> scripts. >> >>> >> >>> -- >> >>> Darren Hart Open Source Technology >> >>>Center >> >>> [email protected] >> Intel >> >>>Corporation >> >>> >> >>> From: Suresh Ratnam <[email protected]> >> >>> Reply-To: MinnowBoard Development and Community Discussion >> >>><[email protected]> >> >>> Date: Wednesday, April 9, 2014 at 15:30 >> >>> To: MinnowBoard Development and Community Discussion >> >>><[email protected]> >> >>> Subject: Re: [MinnowBoard] [Help] Communicating with an Arduino Based >> >>>Autopilot >> >>> >> >>>> Thanks! Can I get an ETA for the update so that I can make decisions >> >>>>for this project. The communication between the two is the last piece. >> >>>> Also, how would the update be applied? Is it through opkg upgrade or >> >>>>do I need to update the kernel? >> >>>> Once again, I appreciate the help >> >>>> On Apr 9, 2014 2:34 PM, "Darren Hart" <[email protected]> >> wrote: >> >>>>> I verified that it was missing from the BSP and I have submitted the >> >>>>>meta >> >>>>> data to add it to the linux-yocto repository. Once that merges, I'll >> >>>>> update the meta-minnow/dora branch to include it. At that point, >> I'll >> >>>>> likely tag and release minnow/dora and request Koen kick off new >> >>>>>Angstrom >> >>>>> builds for dora. >> >>>>> >> >>>>> -- >> >>>>> Darren >> >>>>> >> >>>>> On 4/9/14, 11:26, "[email protected]" <[email protected]> >> wrote: >> >>>>> >> >>>>> >No, it has nothing to do with opkg. CONFIG_USB_ACM is the kernel >> >>>>>config >> >>>>> >option that's required to have the cdc-acm driver built. >> >>>>> > >> >>>>> >Darren can add it in the BSP to make the module available. >> >>>>> > >> >>>>> >On 09/04/14 18:45, Suresh Ratnam wrote: >> >>>>> >> Thanks selsinor. I read up on that and try it later today. >> >>>>> >> Is it through opkg or are the specific steps? >> >>>>> >> >> >>>>> >> On Apr 9, 2014 11:12 AM, <[email protected]> wrote: >> >>>>> >> >> >>>>> >>> CONFIG_USB_ACM will enable it, but really you probably want to >> >>>>>enable >> >>>>> >>>as >> >>>>> >>> modules drivers for every usb device you can. >> >>>>> >>> >> >>>>> >>> >> >>>>> >>> On 09/04/14 17:16, Darren Hart wrote: >> >>>>> >>>> This is very likely due to that particular driver not being >> >>>>>included >> >>>>> >>>>by >> >>>>> >>> the >> >>>>> >>>> BSP. You can verify by determining the specific CONFIG required >> >>>>>and >> >>>>> >>>> verifying it is or is not in your kernel config >> >>>>>(/proc/config.gz). If >> >>>>> >>>>it >> >>>>> >>> is, >> >>>>> >>>> you can verify in the driver source fi the vendor/product ID is >> >>>>> >>> supported by >> >>>>> >>>> the driver. >> >>>>> >>>> >> >>>>> >>>> I suspect you just need to build the driver. If you find the >> >>>>>CONFIG is >> >>>>> >>>> missing, just let me know what it is you want added and I'll >> >>>>>update >> >>>>> >>>>the >> >>>>> >>> BSP. >> >>>>> >>>> In the mean time, you can install the kernel dev packages and >> >>>>>build it >> >>>>> >>>> yourself. >> >>>>> >>>> >> >>>>> >>>> We have 3.10-LTSI support in the dora branch of the minnow BSP >> >>>>>layer >> >>>>> >>>> currently. I was about to tag it and release it, but let's make >> >>>>>sure >> >>>>> >>>>it >> >>>>> >>> has >> >>>>> >>>> the support you need first. If not, I'll add it first. >> >>>>> >>>> >> >>>>> >>>> >> >>>>> >>>> >> >>>>> >>>> _______________________________________________ >> >>>>> >>>> elinux-MinnowBoard mailing list >> >>>>> >>>> [email protected] >> >>>>> >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> >>>>> >>>> >> >>>>> >>> >> >>>>> >>> _______________________________________________ >> >>>>> >>> elinux-MinnowBoard mailing list >> >>>>> >>> [email protected] >> >>>>> >>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> >>>>> >>> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> >> _______________________________________________ >> >>>>> >> elinux-MinnowBoard mailing list >> >>>>> >> [email protected] >> >>>>> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> >>>>> >> >> >>>>> > >> >>>>> >_______________________________________________ >> >>>>> >elinux-MinnowBoard mailing list >> >>>>> >[email protected] >> >>>>> >http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> >>>>> > >> >>>>> >> >>>>> >> >>>>> -- >> >>>>> Darren Hart Open Source >> >>>>>Technology Center >> >>>>> [email protected] Intel >> >>>>>Corporation >> >>>>> >> >>>>> >> >>>>> >> >>>>> _______________________________________________ >> >>>>> elinux-MinnowBoard mailing list >> >>>>> [email protected] >> >>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> >>>> _______________________________________________ elinux-MinnowBoard >> >>>>mailing list [email protected] >> >>>>http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> >> >> >> >> > >> > >> >-- >> >Darren Hart Open Source Technology >> >Center >> >[email protected] Intel >> >Corporation >> > >> > >> > >> >_______________________________________________ >> >elinux-MinnowBoard mailing list >> >[email protected] >> >http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> > >> > >> > >> > >> > >> >_______________________________________________ >> >elinux-MinnowBoard mailing list >> >[email protected]:// >> lists.elinux.org/mailman/listinf >> >o/elinux-minnowboard >> >> >> _______________________________________________ >> elinux-MinnowBoard mailing list >> [email protected] >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> > >
_______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
