Assuming you have no storage attached (usb flash drives, sd cards, sata, msata, etc) the system should resort (eventually) to the UEFI shell. F2 is supposed to work as well, do you have an FTDI serial cable to check what's on the serial port?
- John On 10/21/2014 08:27 PM, Jeremy Hoel wrote: > Right, I tried that and I still get 'Boot failed' and hitting F2 doesn't > help. > > http://imgur.com/ek8Qqoh > > On Wed, Oct 22, 2014 at 2:19 AM, Timothy Hurita <[email protected] > <mailto:[email protected]>> wrote: > > To disable fastboot remove the boot media (unplug the hard drive or > removed the SD card) and boot MBM. This will allow you to get back > into the BIOS. > > _______________________________________________ > elinux-MinnowBoard mailing list > [email protected] > <mailto:[email protected]> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > > > > > _______________________________________________ > elinux-MinnowBoard mailing list > [email protected] > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
