Ahhhh https://bugzilla.yoctoproject.org/show_bug.cgi?id=6532
and https://bugzilla.yoctoproject.org/show_bug.cgi?id=6533 Sorry, I had forgotten that network might be one of those factors, really need to add that to the section about fastboot on the wiki. - John On 10/21/2014 09:28 PM, Jeremy Hoel wrote: > Ha! I figured it out. It was trying to do a network boot too.. once I > removed that I get the shell really easily and from there an exit brings > me to the bios. > > Thanks! > > On Tue, Oct 21, 2014 at 9:47 PM, Jeremy Hoel <[email protected] > <mailto:[email protected]>> wrote: > > I have nothing in but the USB keyboard. I can give it a while to > wait, no problem. I normally just waited like 10 seconds, but I'll > let it sit longer. When i connect via serial I get > > > > >>>>SecStartup > >>>>MemoryInit Done > >>>>BdsEntry > > .[2J.[01;01H.[=3h.[2J.[01;01H.[2J.[01;01H.[=3h.[2J.[01;01H.[2J.[01;01H.[=3h.[2J.[01;01H.[2J.[01;01H.[=3h.[2J.[01;01H.[2J.[01;01H.[=3h.[2J.[01;01H.[2J.[01;01H.[=3h.[2J.[01;01H.[0m.[35m.[40m.[2J.[01;01H.[=3h.[2J.[01;01H.[0m.[37m.[40mBoot > Failed. EFI USB Device > > Boot Failed. EFI Hard Drive > > > > It boots things fine.. I just wanted to turn off the fastboot to > give me more time to test settings and be able to flash bios if need be. > > > On Tue, Oct 21, 2014 at 9:37 PM, John 'Warthog9' Hawley > <[email protected] <mailto:[email protected]>> wrote: > > Assuming you have no storage attached (usb flash drives, sd > cards, sata, > msata, etc) the system should resort (eventually) to the UEFI > shell. F2 > is supposed to work as well, do you have an FTDI serial cable to > check > what's on the serial port? > > - John > > On 10/21/2014 08:27 PM, Jeremy Hoel wrote: > > Right, I tried that and I still get 'Boot failed' and hitting F2 > doesn't > > help. > > > > http://imgur.com/ek8Qqoh > > > > On Wed, Oct 22, 2014 at 2:19 AM, Timothy Hurita <[email protected] > <mailto:[email protected]> > > <mailto:[email protected] <mailto:[email protected]>>> wrote: > > > > To disable fastboot remove the boot media (unplug the hard > drive or > > removed the SD card) and boot MBM. This will allow you to get > back > > into the BIOS. > > > > _______________________________________________ > > elinux-MinnowBoard mailing list > > [email protected] > <mailto:[email protected]> > > <mailto:[email protected] > <mailto:[email protected]>> > > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > > > > > > > > > > _______________________________________________ > > elinux-MinnowBoard mailing list > > [email protected] > <mailto:[email protected]> > > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > > > > _______________________________________________ > elinux-MinnowBoard mailing list > [email protected] > <mailto:[email protected]> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > > > > > > _______________________________________________ > elinux-MinnowBoard mailing list > [email protected] > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
