Here is the Flyswatter2 JTAG Pinout: http://www.tincantools.com/assets/Flyswatter2%20-%2020%20Pin%20JTAG%20Connector.pdf
Links to some more info is on this page: http://www.tincantools.com/JTAG/Flyswatter2.html Haven't tried it myself yet. -Peter On Tue, Nov 4, 2014 at 7:02 PM, Robert Johnston <[email protected]> wrote: > Hi, > > > > Documentation (such as http://www.elinux.org/Minnowboard:SPI_Boot_flash) > indicates that the Minnowboad flash can be programmed using the TinCanTools > Flyswatter2. But I have been unable to find either a schematic or actual > cable to connect from the Flyswatter 20 pin JTAG connector to the > Minnowboard 8 pin SPI connector (or even determine if those are the right > connectors to use). Can anyone point me in the right direction? > > > > Thanks > > > > Robert > > _______________________________________________ > elinux-MinnowBoard mailing list > [email protected] > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > >
_______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
