Hi Peter,
Thanks. I looked at the connections shown for the 20 pin and also have the one from the eLinux org for the SPI connector. Later today or tomorrow I will see if I can match signals. David Anders also replied and is looking into it. Robert From: Peter Ogden [mailto:[email protected]] Sent: Tuesday, November 04, 2014 7:37 PM To: [email protected]; MinnowBoard Development and Community Discussion Cc: [email protected] Subject: Re: [MinnowBoard] Programming flash Here is the Flyswatter2 JTAG Pinout: http://www.tincantools.com/assets/Flyswatter2%20-%2020%20Pin%20JTAG%20Connector.pdf Links to some more info is on this page: http://www.tincantools.com/JTAG/Flyswatter2.html Haven't tried it myself yet. -Peter On Tue, Nov 4, 2014 at 7:02 PM, Robert Johnston <[email protected] <mailto:[email protected]> > wrote: Hi, Documentation (such as http://www.elinux.org/Minnowboard:SPI_Boot_flash) indicates that the Minnowboad flash can be programmed using the TinCanTools Flyswatter2. But I have been unable to find either a schematic or actual cable to connect from the Flyswatter 20 pin JTAG connector to the Minnowboard 8 pin SPI connector (or even determine if those are the right connectors to use). Can anyone point me in the right direction? Thanks Robert _______________________________________________ elinux-MinnowBoard mailing list [email protected] <mailto:[email protected]> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
