I didn't update the Linux drivers because the board functioned properly in a different PC running the exact same Linux (16.04.2 LTS) distribution without requiring updated drivers. I didn't check the igb driver revs to be sure but I can check that & update to the most recent (available from Intel I think).
Thanks, Peter On Thu, Jul 6, 2017 at 12:46 PM, Douglas Kryder <dkry...@gmail.com> wrote: > did you install the drivers? > > On Wed, Jul 5, 2017 at 5:48 PM, Peter Vinsel <petervin...@gmail.com> > wrote: > >> I just got a new quad core TurboT with a SilverJaw lure so I could >> install a dual 10/100/1000 EN mPCIe board. I've also got a mSATA SSD drive >> & I installed Ubuntu 16.06 Linux on it. The only problem is that the 2 EN >> ports are not coming up in Linux. I was able to try to mPCIe board in >> different CPU and it works fine. >> >> I've done a little troubleshooting and the dmesg log shows that Linux is >> getting a bunch of errors attempting to initial the card. It looks like >> there a PCI memory mapping problem with lots of BAR errors. I've attached a >> file with the lspci output as well as the dmesg output. >> >> Has anyone else tried using the quad core minnowboard with the Jetway >> ADMPEIDLB using the SilverJaw successfully? >> >> Peter Vinsel >> >> _______________________________________________ >> elinux-MinnowBoard mailing list >> elinux-MinnowBoard@lists.elinux.org >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> >> > > _______________________________________________ > elinux-MinnowBoard mailing list > elinux-MinnowBoard@lists.elinux.org > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > >
_______________________________________________ elinux-MinnowBoard mailing list elinux-MinnowBoard@lists.elinux.org http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
