On 10/27/07, Sean Mahrt <[EMAIL PROTECTED]> wrote: > So I'm back to beating it around again. Finally got the IVTV branch to > somewhat behave. So here's the scoop. Gathered there's a bit of turmoil > in the whole licensing thing, and personally, I guess I don't care. I'm > after quality code, one way or another. Genkernel (Gentoo) is fine and > easy, but I'm not afraid of spinning my own kernel with patches and/or > additional mods. > > (soapbox put away) > > OK, so the branch from v4l-dvb-kernel/experimental compiles and almost > runs fine on my epia 1Ghz board (other than some strange *horizontal* blur > lines???) but the goal is to put this on my server with my PVR-500 card. > > I have made some progress as the branch from "makomk" that was supposably > a snapshot of the kernel branch compiles fine and the PVR-500 card works > with the embedded ivtv. Now, the EM2880 driver craps out, but no kernel > panic, just doesn't work.
Hi, I assume that you're using the HVR-950 for digital. Please copy-and-paste the stuff printed to dmesg when you load the "makomk" branch of the em2880 driver and try to use it. (It'd also help if you could clarify what exactly you mean by "doesn't work".) (In theory, the HVR-950 ought to work with my branch of the driver, so I've probably accidentally broken something. The most likely culprit is the tuner driver - I made some fairly large changes to it, and it might not be doing ATSC right. Unfortunately, it's going to get replaced eventually, once I figure out how to get Mauro's driver to work correctly on my device, and then things will get even more interesting.) Aidan _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
