Hello to anyone in the list, I just bought an Hauppauge WinTV-HVR 900 hybrid TV stick USB2, but I've no luck in using it because I'm not very expert. I've downloaded, compiled and installed the sources of v4l-dvb-experimental, then I unpacked the firmware (i've tryed v3 and v4) and finally made the udev changes found here: /lib/firmware/v4l-dvb-experimental/linux/Documentation/dvb/udev.txt
When I plug the stick I find in /var/log/messages that the DVB doesn't work (see the dmesg extract at the bottom page) but the analog TV works fine. I've tryed modprobe em28xx device_mode=1 and also modprobe em28xx card=15 device_mode=1 but nothing changes In according to this http://mcentral.de/wiki/index.php/Em2880#Devices the DVB should work fine. I'm currently using an ArchLinux with a custom kernel Linux silverstar 2.6.23.9-KaL #1 SMP PREEMPT Sat Dec 1 17:03:59 CET 2007 i686 Intel(R) Celeron(R) M processor 1.40GHz GenuineIntel GNU/Linux Did someone find out how to get this stick working with DVB support? Thank you very much in advance for any help. Fabio Most relevant loaded modules: qt1010 9732 0 mt2060 8580 0 mt352 9992 0 zl10353 9608 0 em2880_dvb 15108 0 dvb_core 69032 1 em2880_dvb xc3028_tuner 11776 1 tvp5150 21392 0 tuner 63400 0 em28xx 87348 1 em2880_dvb compat_ioctl32 5120 1 em28xx ir_common 37508 1 em28xx videodev 28160 1 em28xx v4l2_common 18432 4 tvp5150,tuner,em28xx,videodev v4l1_compat 15492 2 em28xx,videodev tveeprom 17424 1 em28xx plus all the USB modules [...] from dmesg usb 1-4: new high speed USB device using ehci_hcd and address 3 usb 1-4: configuration #1 chosen from 1 choice em28xx new video device (2040:6502): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx: you're using the experimental/unstable tree from mcentral.de em28xx: there's also a stable tree available but which is limited to em28xx: linux <=2.6.19.2 em28xx: it's fine to use this driver but keep in mind that it will move em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's em28xx: proved to be stable em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 attach_inform: eeprom detected. em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 em28xx #0: i2c eeprom 70: 32 00 38 00 35 00 32 00 33 00 33 00 36 00 30 00 em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 60 63 em28xx #0: i2c eeprom c0: 1e f0 74 02 01 00 01 79 69 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 60 63 em28xx #0: i2c eeprom f0: 1e f0 74 02 01 00 01 79 69 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a Vendor/Product ID= 2040:6502 AC97 audio (5 sample rates) 500mA max power Table at 0x24, strings=0x1e82, 0x186a, 0x0000 tveeprom 1-0050: Hauppauge model 65018, rev B2C0, serial# 1991520 tveeprom 1-0050: tuner model is Xceive XC3028 (idx 120, type 71) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) tveeprom 1-0050: audio processor is None (idx 0) tveeprom 1-0050: has radio setting new tuner type now 71! tuner 1-0061: chip found @ 0xc2 (em28xx #0) attach inform (default): detected I2C address c2 /lib/firmware/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback tuner 0x61: Configuration acknowledged /lib/firmware/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback /lib/firmware/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! /lib/firmware/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner successfully loaded attach_inform: tvp5150 detected. tvp5150 1-005c: tvp5150am1 detected. Loading base firmware: xc3028_init0.i2c.fw Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw xc3028-tuner.c: firmware 2.7 ANALOG TV REQUEST em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx #0: V4L2 device registered as /dev/video0 em2880-dvb.c: DVB Init Loading base firmware: xc3028_8MHz_init0.i2c.fw Loading specific dtv settings: xc3028_DTV6_ATSC_2620.i2c.fw xc3028-tuner.c: firmware 2.7 Sending extra call for Digital TV! FIXME:em28xx_i2c_send_bytes(1e): write failed: =============================== 7f ================================ zl10353_read_register: readreg error (reg=127, ret==-19) em2880-dvb.c: failed initializing zl10353 DVB-T demodulator em2880-dvb.c: retrying with mt352 DVB-T demodulator FIXME:em28xx_i2c_send_bytes(1e): write failed: =============================== 7f ================================ mt352_read_register: readreg error (reg=127, ret==-19) em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1" em28xx #0: Found Hauppauge WinTV HVR 900 _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
