It's a common and unfixed problem. The same happens with Terratec HybridT XS USB. Bye
On Dec 2, 2007 3:11 PM, Fabio <[EMAIL PROTECTED]> wrote: > Hello to anyone in the list, > I just bought an Hauppauge WinTV-HVR 900 hybrid TV stick USB2, but I've no > luck > in using it because I'm not very expert. > I've downloaded, compiled and installed the sources of > v4l-dvb-experimental, > then I unpacked the firmware (i've tryed v3 and v4) and finally made the > udev changes found here: > /lib/firmware/v4l-dvb-experimental/linux/Documentation/dvb/udev.txt > > When I plug the stick I find in /var/log/messages that the DVB doesn't > work (see the dmesg extract at the bottom page) but the analog TV works > fine. > > I've tryed > modprobe em28xx device_mode=1 > and also > modprobe em28xx card=15 device_mode=1 > but nothing changes > > In according to this > http://mcentral.de/wiki/index.php/Em2880#Devices > the DVB should work fine. > > I'm currently using an ArchLinux with a custom kernel > Linux silverstar 2.6.23.9-KaL #1 SMP PREEMPT Sat Dec 1 17:03:59 CET 2007 > i686 Intel(R) Celeron(R) M processor 1.40GHz GenuineIntel GNU/Linux > > Did someone find out how to get this stick working with DVB support? > Thank you very much in advance for any help. > Fabio > > > Most relevant loaded modules: > qt1010 9732 0 > mt2060 8580 0 > mt352 9992 0 > zl10353 9608 0 > em2880_dvb 15108 0 > dvb_core 69032 1 em2880_dvb > xc3028_tuner 11776 1 > tvp5150 21392 0 > tuner 63400 0 > em28xx 87348 1 em2880_dvb > compat_ioctl32 5120 1 em28xx > ir_common 37508 1 em28xx > videodev 28160 1 em28xx > v4l2_common 18432 4 tvp5150,tuner,em28xx,videodev > v4l1_compat 15492 2 em28xx,videodev > tveeprom 17424 1 em28xx > plus all the USB modules > > > [...] from dmesg > usb 1-4: new high speed USB device using ehci_hcd and address 3 > usb 1-4: configuration #1 chosen from 1 choice > em28xx new video device (2040:6502): interface 0, class 255 > em28xx: device is attached to a USB 2.0 bus > em28xx: you're using the experimental/unstable tree from mcentral.de > em28xx: there's also a stable tree available but which is limited to > em28xx: linux <=2.6.19.2 > em28xx: it's fine to use this driver but keep in mind that it will move > em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's > em28xx: proved to be stable > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > attach_inform: eeprom detected. > em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 > em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 > em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 > em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 > em28xx #0: i2c eeprom 70: 32 00 38 00 35 00 32 00 33 00 33 00 36 00 30 00 > em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 > em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 > em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 > em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 60 63 > em28xx #0: i2c eeprom c0: 1e f0 74 02 01 00 01 79 69 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 > em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 60 63 > em28xx #0: i2c eeprom f0: 1e f0 74 02 01 00 01 79 69 00 00 00 00 00 00 00 > EEPROM ID= 0x9567eb1a > Vendor/Product ID= 2040:6502 > AC97 audio (5 sample rates) > 500mA max power > Table at 0x24, strings=0x1e82, 0x186a, 0x0000 > tveeprom 1-0050: Hauppauge model 65018, rev B2C0, serial# 1991520 > tveeprom 1-0050: tuner model is Xceive XC3028 (idx 120, type 71) > tveeprom 1-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital > (eeprom 0xd4) > tveeprom 1-0050: audio processor is None (idx 0) > tveeprom 1-0050: has radio > setting new tuner type now 71! > tuner 1-0061: chip found @ 0xc2 (em28xx #0) > attach inform (default): detected I2C address c2 > /lib/firmware/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner > callback > tuner 0x61: Configuration acknowledged > /lib/firmware/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner > callback > /lib/firmware/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! > /lib/firmware/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner > successfully loaded > attach_inform: tvp5150 detected. > tvp5150 1-005c: tvp5150am1 detected. > Loading base firmware: xc3028_init0.i2c.fw > Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw > xc3028-tuner.c: firmware 2.7 > ANALOG TV REQUEST > em28xx #0: V4L2 VBI device registered as /dev/vbi0 > em28xx #0: V4L2 device registered as /dev/video0 > em2880-dvb.c: DVB Init > Loading base firmware: xc3028_8MHz_init0.i2c.fw > Loading specific dtv settings: xc3028_DTV6_ATSC_2620.i2c.fw > xc3028-tuner.c: firmware 2.7 > Sending extra call for Digital TV! > FIXME:em28xx_i2c_send_bytes(1e): write failed: > =============================== > 7f > ================================ > zl10353_read_register: readreg error (reg=127, ret==-19) > em2880-dvb.c: failed initializing zl10353 DVB-T demodulator > em2880-dvb.c: retrying with mt352 DVB-T demodulator > FIXME:em28xx_i2c_send_bytes(1e): write failed: > =============================== > 7f > ================================ > mt352_read_register: readreg error (reg=127, ret==-19) > em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb > em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe > em28xx device_mode=1" > em28xx #0: Found Hauppauge WinTV HVR 900 > > _______________________________________________ > Em28xx mailing list > [email protected] > http://mcentral.de/mailman/listinfo/em28xx >
_______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
