Hello, with the drivers dated of Saturday, I can not use analogic tv yet. Since I am in France, I must to use SECAM norm
When I scan channels with xawtv, I obtain the following pic http://rapidshare.com/files/96403444/capture4.png.html It looks like the Pinnacle stick behaves like being in PAL norm.... With Tvtime, there is nothing. Tvtime complains that there is no signal :( --set parameters ---parameters for analog tv setting secam a2 dk3 xc3028_control.c xc3028_initialize 182 Base firmware changed: 0 xc3028_control.c xc3028_initialize 201 xc3028_control.c xc3028_initialize 211 xc3028_control.c xc3028_initialize 215 xc3028_control.c xc3028_initialize 225 trying to set RF frequency 8692.000000 -- 8692 -- 543.250000! --set parameters ---parameters for analog tv setting secam a2 dk3 xc3028_control.c xc3028_initialize 182 Base firmware changed: 0 xc3028_control.c xc3028_initialize 201 xc3028_control.c xc3028_initialize 211 xc3028_control.c xc3028_initialize 215 xc3028_control.c xc3028_initialize 225 trying to set RF frequency 8564.000000 -- 8564 -- 535.250000! ------------------------------------------------------------------------------------ DMESG OUTPUT ---------------------------------------------------------------------------- em28xx-input.c: remote control handler detached em28xx #0: disconnecting em28xx#0 video em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered usb 1-2: new high speed USB device using ehci_hcd and address 5 usb 1-2: configuration #1 chosen from 1 choice em28xx new video device (2304:0226): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 input: em2880/em2870 remote control as /class/input/input6 em28xx-input.c: remote control handler attached moduleid: 1 tuner-stub: adding support for Xceive - xc3028 tuner-stub: userspace driver version 1 tuner-stub: Copyright: Markus Rechberger <[EMAIL PROTECTED]> tuner-stub: adding support for Texas Instruments - tvp5150 tuner-stub: userspace driver version 1 tuner-stub: Copyright: Mauro Chehab tuner 1-0061: chip found @ 0xc2 (em28xx #0) attach inform (default): detected I2C address c2 attach_inform: tvp5150 detected. em28xx: registered module_id 1 requesting to change mode requesting to change mode em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx #0: V4L2 device registered as /dev/video0 em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger em2880-dvb.c: DVB Init requesting to change mode switching to digital TV requesting drx3975d driver! tuner-stub: adding support for Micronas - drx3975d tuner-stub: userspace driver version 1 tuner-stub: Copyright: Markus Rechberger <[EMAIL PROTECTED]> drx3975d_callback not implemented (2) trying to reattach tuner! requesting to change mode requesting to change mode DVB: registering new adapter (em2880 DVB-T). DVB: registering frontend 0 ((userspace) drx3975d)... em28xx #0: Found Pinnacle Hybrid Pro (2) demod init! demod init! demod init! demod init! resetting device for analogue input! requesting to change mode switching to analogue TV requesting to change mode requesting to change mode requesting to change mode requesting to change mode requesting to change mode requesting to change mode requesting to change mode requesting to change mode requesting to change mode requesting to change mode Any hints to have analogic tv working for me? David
_______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
