On Sun, Mar 2, 2008 at 12:08 PM, David Adam <[EMAIL PROTECTED]> wrote: > Hello, > > with the drivers dated of Saturday, I can not use analogic tv yet. > Since I am in France, I must to use SECAM norm > > When I scan channels with xawtv, I obtain the following pic > http://rapidshare.com/files/96403444/capture4.png.html > > It looks like the Pinnacle stick behaves like being in PAL norm.... >
It seems to be a SECAM L issue actually SECAM DK seems to be fine, I just tested it with the signal generator and it doesn't lock onto the channel. I'll do some further investigation uppon it during the next few days. Markus > With Tvtime, there is nothing. Tvtime complains that there is no signal :( > > --set parameters > ---parameters for analog tv > setting secam a2 dk3 > xc3028_control.c xc3028_initialize 182 > Base firmware changed: 0 > xc3028_control.c xc3028_initialize 201 > xc3028_control.c xc3028_initialize 211 > xc3028_control.c xc3028_initialize 215 > xc3028_control.c xc3028_initialize 225 > trying to set RF frequency 8692.000000 -- 8692 -- 543.250000! > --set parameters > ---parameters for analog tv > setting secam a2 dk3 > xc3028_control.c xc3028_initialize 182 > Base firmware changed: 0 > xc3028_control.c xc3028_initialize 201 > xc3028_control.c xc3028_initialize 211 > xc3028_control.c xc3028_initialize 215 > xc3028_control.c xc3028_initialize 225 > trying to set RF frequency 8564.000000 -- 8564 -- 535.250000! > > > > ------------------------------------------------------------------------------------ > DMESG OUTPUT > ---------------------------------------------------------------------------- > em28xx-input.c: remote control handler detached > em28xx #0: disconnecting em28xx#0 video > em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered > em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered > usb 1-2: new high speed USB device using ehci_hcd and address 5 > usb 1-2: configuration #1 chosen from 1 choice > em28xx new video device (2304:0226): interface 0, class 255 > em28xx: device is attached to a USB 2.0 bus > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > input: em2880/em2870 remote control as /class/input/input6 > em28xx-input.c: remote control handler attached > moduleid: 1 > tuner-stub: adding support for Xceive - xc3028 > tuner-stub: userspace driver version 1 > tuner-stub: Copyright: Markus Rechberger <[EMAIL PROTECTED]> > tuner-stub: adding support for Texas Instruments - tvp5150 > tuner-stub: userspace driver version 1 > tuner-stub: Copyright: Mauro Chehab > tuner 1-0061: chip found @ 0xc2 (em28xx #0) > attach inform (default): detected I2C address c2 > attach_inform: tvp5150 detected. > em28xx: registered module_id 1 > requesting to change mode > requesting to change mode > em28xx #0: V4L2 VBI device registered as /dev/vbi0 > em28xx #0: V4L2 device registered as /dev/video0 > em28xx-audio.c: probing for em28x1 non standard usbaudio > em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > em2880-dvb.c: DVB Init > requesting to change mode > switching to digital TV > requesting drx3975d driver! > tuner-stub: adding support for Micronas - drx3975d > tuner-stub: userspace driver version 1 > tuner-stub: Copyright: Markus Rechberger <[EMAIL PROTECTED]> > drx3975d_callback not implemented (2) > trying to reattach tuner! > requesting to change mode > requesting to change mode > DVB: registering new adapter (em2880 DVB-T). > DVB: registering frontend 0 ((userspace) drx3975d)... > em28xx #0: Found Pinnacle Hybrid Pro (2) > demod init! > demod init! > demod init! > demod init! > resetting device for analogue input! > requesting to change mode > switching to analogue TV > requesting to change mode > requesting to change mode > requesting to change mode > requesting to change mode > requesting to change mode > requesting to change mode > requesting to change mode > requesting to change mode > requesting to change mode > requesting to change mode > > Any hints to have analogic tv working for me? > > David > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
